For Better Performance Please Use Chrome or Firefox Web Browser

English Paper

[1] Amini R, Nizomov Z, Razazi M, Ganiev I. N, Obidov Z. R. Temperature Dependence of thermodynamic Properties of Zn-5al and Zn-55al Alloys with Magnesium. Orient J Chem 2012;28(2)

[2] R. Amini, Z. Obidov, I. Ganiev and M. Razazi, "Anodic Behavior of Zn-Al-Be Alloys in NaCl Solution and the Influence of Be on Structure," Journal of Surface Engineered Materials and Advanced Technology, Vol. 2 No. 2, 2012, pp. 127-131. doi: 10.4236/jsemat.2012.22020.

[3] R. Amini, Z. Obidov, I. Ganiev and M. Razazi, "Potentiodynamical Research of Zn-Al-Mg Alloy System in the Neutral Ambience of NaCl Electrolyte and Influence of Mg on the Structure," Journal of Surface Engineered Materials and Advanced Technology, Vol. 2 No. 2, 2012, pp. 110-114. doi: 10.4236/jsemat.2012.22017.

[4] Razazi M, Amini R. N, Eshov B. B, Badalov A. B. Preparation of Physical and Chemical and Thermodynamic Properties of Aluminum Alloys-Cerium. Mat.Sci.Res.India;9(1).

[5] Boroujeni M. R, Najafabadi R. A, Badalovich B. E, Pulatov P, Badalovich A. B. Structure and Properties of Aluminum Alloys with Cerium, Praseodymium and Neodymium. Orient J Chem 2012;28(4)..

[6] Najafabadi R. A, Irani M, Ganiev I, Obidov Z. Galfan I and Galfan II doped with calcium, Corrosion Resistant Alloys. Orient J Chem 2014;30(3).

[7] Irani, M., Amini Najafabadi, R., Dallali Isfahani, T. A Study of Precision Forging of Steel Spur Gears: Upper Bound Model and Experiments. International Journal of Iron & Steel Society of Iran, 2015; 11(1): 18-23.

[8] Meysami, A., Amini Najafabadi, R. Microstructural Evolution of X45CrNiW189 Valve Steel During Hot Deformation. International Journal of Iron & Steel Society of Iran, 2015; 11(1): 31-34.

[9] Shabanlo, M., Amini Najafabadi, R. and Meysami, A. (2018), "Evaluation and comparison the effect of heat treatment on mechanical properties of NiCrBSi thermally sprayed coatings", Anti-Corrosion Methods and Materials, Vol. 65 No. 1, pp. 34-37.

[10] Ebrahim Mortazavi, Reza Amini Najafabadi, Amirhossein Meysami,Effect of heat input on microstructure and mechanical properties of dissimilar joints of AISI 316L steel and API X70 high-strength low-alloy steel,Journal of Iron and Steel Research, International,Volume 24, Issue 12,2017,Pages 1248-1253.

[11] Nazem Habibpour, Ali Shafyei, Reza Amini Najafabadi, Amirhossein Meysami, Effects of post-weld heat treatment temperature on the microstructure and mechanical properties of welded A517-Gr.B steel by SMAW method, Metall. Res. Technol., 114 3 (2017) 312.

[12] Meysami, A., Rahimzadeh, H., Amini Najafabadi, R., Dallali Isfahani, T. Comparison of Heat Transfer Power of the Cooling Panel with Square Cross Section and Circular Cross Section in Electric Arc Furnaces Steelmaking by the use of Computational Fluid Dynamics. International Journal of Iron & Steel Society of Iran, 2017; 14(2): 38-42.

[13] Aghili, S.E., Shamanian, M. & Najafabadi, R.A. Synthesis of Ni(Cr)–hBN Nanocomposite by Mechanical Alloying and Its Thermodynamical Evaluation. Russ. J. Non-ferrous Metals 60, 301–311 (2019).

[14] S.E. Aghili, M. Shamanian, R. Amini Najafabadi, A. Keshavarzkermani, R. Esmaeilizadeh, U. Ali, E. Marzbanrad, E. Toyserkani,Microstructure and oxidation behavior of NiCr-chromium carbides coating prepared by powder-fed laser cladding on titanium aluminide substrate,Ceramics International, Volume 46, Issue 2,2020, Pages 1668-1679.

[15] Mehrabi, Afshin, Sharifi, Hassan, Asadi Asadabad, Mohsen, Amini Najafabadi, Reza and Rajaee, Ali. "Improvement of AISI 4340 steel properties by intermediate quenching – microstructure, mechanical properties, and fractography" International Journal of Materials Research, vol. 111, no. 9, 2020, pp. 711-779.

[16] Obidov Ziyodullo R., Amini Reza, Nazarov Odiljon N., Dzhayloev Jamshed Kh., Ganiev Izatullo N., Usmanov Rakhmatjon HIGH TEMPERATURE AND ELECTROCHEMICAL CORROSION OF ZN0.5AL ALLOY DOPED WITH CALCIUM IN VARIOUS MEDIA // Известия ВУЗов. Химия и химическая технология. 2020. №11. URL: (дата обращения: 24.04.2023).

[17] Amini Najafabadi, R., Salehi, F., Isfahani, T. Investigating the Effect of Optimum Welding Parameters on the Microstructural and Mechanical Properties of St37 Steel and 316L Stainless Steel Welded by the Friction Stir Welding Process. International Journal of Iron & Steel Society of Iran, 2019; 16(2): 42-49.

[18] Sadeghzade Sima,Amini Najafabadi Reza, Meysami Mohammad, Meysami Amirhossein, Khodaei Mohammad, Isfahani Taghi, Porous Titanium Scaffold: A New Design for Controlled Drug Delivery, Material Design & Processing Communications, 2023.

[19] Aghili, S.E., Shamanian, M., Amini Najafabadi, R. et al. Evaluation of Short-Term Oxidation Mechanism of Laser Cladded Ni–Cr–C Coating on Titanium Aluminide Substrate. High Temperature Corrosion of mater. 99, 311–329 (2023).

[20] P. Siahmard, R. Amini Najafabadi, A. Meysami, M. Meysami, and T. Isfahani, "Investigation of structural properties of forsterite coating on AZ91 magnesium alloy by sol-gel method," Results in Engineering, vol. 18, p. 101138, 2023/06/01/ 2023.

[21]  Amirhossein Meysami, Reza Amini Najafabadi, Ehsan Nemati Varnoosfaderani, Erfan Aghili, Aliasghar Foroughifar, "Examination of surface contamination and impurities in tinplate samples, both passivated and non-passivated", Materials Technology Reports, vol.1, p.1,2023.

[22] Bahareh Etemadifar, Reza Amini Najafabadi, Amirhossein Meysami & Mahshid Kharaziha (2023) Improving biocompatibility and corrosion resistance of titanium alloy implants with bredigite-graphene oxide nanocomposite coatings, Journal of Adhesion Science and Technology, DOI: 10.1080/01694243.2023.2282841

[23] Salehi Renani, M., Meysami, A., Amini Najafabadi, R. et al. Effect of Cooling Rate on Structural, Corrosion, and Mechanical Properties of Cobalt–Chromium–Molybdenum Dental Alloys. J Bio Tribo Corros 10, 15 (2024).

[24]  Meysami A, Najafabadi, R.A., Yosefnejad, T. et al. Enhancing Wear Behavior and Hardness of D5 Cold Work Tool Steel through TiCrN Multilayer Nanocoating via Physical Vapor Deposition. Surf. Engin. Appl.Electrochem. 60, 58–68 (2024).

[25]   Meysami A, Najafabadi RA, Meysami M. Characterization and Wear Behavior Analysis of Tungsten Carbide-Nickel Cladding Deposited on Carbon Steel by GTAW. Results in Engineering. 2024:102369.

Journal Papers

تحت نظارت وف ایرانی